Spiga

Error message after you upgrade to Windows XP Service Pack 3


Most computers include an image that the manufacturer created by using the System Preparation (Sysprep) tool. Sysprep lets the computer manufacturer generate an image that can be used on different computers.
The problem may occur if the original Windows XP Service Pack Sysprep image is created on an Intel-processor-based computer and if the Sysprep image is then deployed on a non-Intel-processor-based computer.
Under this configuration, after the computer is upgraded to Windows XP SP3, the Intel processor driver (Intelppm.sys) may try to load because an orphaned registry key remains from the original Sysprep image.
This issue may also occur if the original Windows XP SP3 Sysprep image is created on an Intel-processor-based computer and if it is then deployed onto a on-Intel-processor-based computer. Again, the Intel processor driver (Intelppm.sys) may try to load because an orphaned registry key remains from the original Sysprep image.
After you upgrade a computer that uses a processor other than an Intel processor to Microsoft Windows XP Service Pack 3 (SP3), you may receive the following error message after you restart the computer:
A problem has been detected and Windows has been shut down 
to prevent damage to your computer...

Technical information:

*** STOP: 0x0000007E (0xC0000005, 0xFC5CCAF3, 0xFC90F8C0, 0xFC90F5C0)
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
This steps tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. To resolve this issue, follow these steps:
  1. Restart your computer in Safe Mode.
  2. Click Start, click Run, type regedit, and then click OK.
  3. Locate and then click the following registry key:
    HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\Intelppm
  4. In the right pane, right-click the Start entry, and then click Modify.
  5. In the Value data box, type 4, and then click OK.
  6. Quit Registry Editor.
  7. Restart your computer.

XP SECRETS

Software Easter Eggs (Definition) - A hidden message or feature in an application. This guide covers the undocumented and hidden features in Windows XP.
All of the following were tested in Win XP Pro only.

Defrag
Secret - Hidden Command Line Switch
Instructions - Go to "Start", "Run" and Type defrag c: -b to defragment the Boot and Application Prefetch information.
Notes - Windows XP will run this automatically every three days or so, during system idle periods. BootVis will evoke this when you run the "Optimize System" function.

There is no need to manually run this unless you wish to immediately optimize a newly installed application's load time.

IExpress
Secret - Hidden Install Creator
Instructions - Go to Start, Run, type iexpress

Notes - IExpress is a technology designed to simplify creation of a setup program. Using the step-by-step IExpress Wizard, you can create self-extracting files that automatically run the setup program contained inside. The setup program can be an .inf file or an executable program.
IExpress technology automatically removes the setup files after installation, saving the user time and frustration.

Netmeeting
Secret - Hidden Internet Conference Application
Instructions - Go to Start, Run, type conf

Notes - Windows XP is the last version of Micr@s@ft Windows to include NetMeeting. NetMeeting delivers a complete Internet conferencing solution for all Windows users with multi-point data conferencing, text chat, whiteboard, and file transfer, as well as point-to-point audio and video.

Notepad
Secret - Create a Log File
Instructions - Launch Notepad, Type .LOG on the first line, and then press Enter to move to the next line. On the File menu, click Save As, type a descriptive name for your file in the File name box, and then click OK. When you next open the file, note that the date and time have been appended to the end of the log, immediately preceding the place where new text can be added. You can use this functionality to automatically add the current date and time to each log entry.

Paint
Secret - Image Trails
Instructions - Open an image and hold down Shift then drag the image around to create an image trail.

Secret - 10x Zoom
Instructions - Open an image and select the magnifying glass icon.
Left-Click exactly on the line below the 8x.

Private Character Editor
Secret - Hidden Font Editor
Instructions - Go to Start, Run, type eudcedit

Notes - You can use Private Character Editor to create unique letters and logos for your font library.

Windows Media Player 6.4
Secret - Hidden Windows Media Player
Instructions - Go to Start, Run, type mplayer2

Notes - Windows Media Player 6.4 (Classic) is installed along with Windows Media Player 7. The only update is that it now supports the latest codecs.

GAME SECRETS

FreeCell
Secret - Instant Win
Instructions - Hold down Ctrl + Shift + F10 during game play. Then you will be asked if you want to Abort, Retry or Ignore. Choose Abort, then move any card to instantly win.

Secret - Hidden Game Modes
Instructions - In the "Game" menu choose "Select Game". Enter -1 or -2 to activate the hidden game modes.


Hearts

Secret - Show All Cards
Instructions - Edit this registry key:
HKEY_CURRENT_USER\Software\Micr@s@ft\Windows\Curre ntVersion\Applets\Hearts and create a new String
value named ZB with a Data value of 42. Start Hearts and Press Ctrl + Alt + Shift + F12 to show all the cards.

Background - This secret is a reference to Douglas Adams' book the Hitch Hiker's Guide to the Galaxy. 'ZB' is the initials of the character Zaphod Beeblebrox, the Galactic President. '42' is the answer to The Ultimate Question Of Life, the Universe and Everything.


Minesweeper
Secret - Reveal Mines
Instructions - Minimize or close all running applications. Launch Minesweeper, then type xyzzy. Next hold down either shift key for one second. Now when you move the mouse cursor over a Minesweeper square you will see a tiny white pixel in the top left corner of your desktop screen.
This pixel will change to black when your mouse moves over a mine. You may need to change you desktop background to a solid color other then white or black to see the pixel.

Secret - Stop Timer
Instructions - Launch Minesweeper and start a game so the timer starts counting, then press the Windows Key + D to show the desktop. Now when you select minesweeper from the taskbar you can continue playing with the timer stopped.


Pinball
Secret - Extra Balls
Instructions - Type 1max at the start of a new ball to get extra balls.

Secret - Gravity Well
Instructions - Type gmax at the start of a new game to activate the Gravity Well.

Secret - Instant Promotion
Instructions - Type rmax at the start of a new game to go up in ranks.

Secret - Skill Shot
Instructions - Launch the ball partially up the chute past the third yellow light bar so it falls back down to get 75,000 points. There are six yellow light bars that are worth a varying amount of points:

First: 15,000 points
Second: 30,000 points
Third: 75,000 points
Fourth: 30,000 points
Fifth: 15,000 points
Sixth: 7,500 points

Secret - Test Mode
Instructions - Type hidden test at the start of a new ball to activate Test Mode. No notification will be given that this is activated but you can now left-click the mouse button and drag the ball around. While in test mode press the following keys for more secrets:

H - Get a 1,000,000,000 High Score
M - Shows the amount of system memory
R - Increases your rank in game
Y - Shows the Frames/sec rate

Secret - Unlimited Balls
Instructions - Type bmax at the start of a new ball. No notification will be given that this is activated but when a ball is lost a new ball will appear from the yellow wormhole indefinitely. Once this is activated you will be unable to activate other secrets without restarting the game.

Solitaire
Secret - Instant Win
Instructions - Press Alt + Shift + 2 during game play to instantly win.

Secret - Draw single cards in a Draw Three game
Instructions - Hold down CTRL + ALT + SHIFT while drawing a new card. Instead of drawing three cards you will only draw one.

OS SECRETS

Add/Remove
Secret - Hidden Uninstall Options
Instructions - Warning: Proceed at your own risk! Browse to
C:\Windows\inf\ and make a backup copy of sysoc.inf. Then open the original file
C:\Windows\inf\sysoc.inf in notepad. Go to "Edit" and select "Replace".
In "Find what:" type ,hide and in "Replace with:" type , then select
"Replace All", save and close the file. Go to the "Control Panel",
"Add/Remove", select "Add/Remove Windows Components". You will now see many more Windows components to uninstall. Do not remove anything with no label or that you do not recognize or fully understand what it does. Doing so can break certain functionality in Windows.

Control Panel
Secret - Hidden Control Panel Extensions
Instructions - Download and install TweakUI, launch, go to "Control Panel" and check any item not selected, then "Apply" and "OK". You will now see the hidden control panel extensions.

Device Manager
Secret - Hidden Devices
Instructions - Go to the "Control Panel", "System" icon, "Hardware" tab and select "Device Manager". Select "View" and Show hidden devices.

Secret - Phantom Devices
Instructions - Go to "Start", "Programs", "Accessories" and select "Command Prompt". At the command prompt, type "set
devmgr_show_nonpresent_devices=1" and press Enter. At the command prompt, type "start devmgmt.msc" and press Enter. Select "View" and Show hidden devices. You can see devices that are not connected to the computer. - Source

Notes - When you close the command prompt window, Windows clears the "devmgr_show_nonpresent_devices=1" variable that you set and prevents phantom devices from being displayed when you select "Show hidden devices".

Music
Secret - Music from the Installer
Instructions - Browse to C:\Windows\system32\oobe\images\title.wma and play.

Notes - "OOBE" stands for "Out-of-Box Experience".

Shutdown
Secret - Display Hibernate Option on the Shut Down dialog
Instructions - Go to "Start", "Turn Off Computer..." and press either Shift key to change the "Stand By" button to "Hibernate"



tHANKS: MOHIT GUPTA(HACKINGTIPS.BLOGSPOT.COM )

How to get someones IP-address


How do you get his IP? I'll tell you.
Using MSN:
The easiest way is to download MSN Messenger Plus and install the script Check IP that could be found everywhere on the net. http://www.msgpluslive.net is the website for downloading MSN mgr Plus. Peoples IPs will popup when logged in.
If your victims doesn't appear you can just ask him to recieve a file and it will popup. Doesn't matter what you send. But there must be an estabilished connection between your and his computer. That only happens when sending files. That's because all chats go trough Microsoft's servers.

If you don't have the script you can open Command Prompt and just write "netstat -a" and press Enter to see all the current established connections. This must be done WHILE sending (or recieving) a file.
Using DC++:
Download the victims filelist and scroll to the right to see the IP adresse in the download field. If you're OP/Owner then you just write "!ui nickname"
If victim is hosting server/wesite:
Go to Command Prompt and write "nslookup www.server.com". Replace the adresse with the victims and Command Prompt will show its IP to you. Easy as that.
Getting IPs from another sources:
All that's recuired is an established connection and you can get victims IP using NetLimiter. This Program can be downloaded from http://www.netlimiter.com


Thanks: mohit gupta (hakingtips.blogspot.com )

Windows Xp Tips 'n' Tricks

Please note that some of these tips require you to use a Registry Editor (regedit.exe), which could render your system unusable. Thus, none of these tips are supported in any way: Use them at your own risk. Also note that most of these tips will require you to be logged on with Administrative rights.

Unlocking WinXP's setupp.ini
============================

WinXP's setupp.ini controls how the CD acts. IE is it an OEM version or retail? First, find your setupp.ini file in the i386 directory on your WinXP CD. Open it up, it'll look something like this:

ExtraData=707A667567736F696F697911AE7E05
Pid=55034000

The Pid value is what we're interested in. What's there now looks like a standard default. There are special numbers that determine if it's a retail, oem, or volume license edition. First, we break down that number into two parts. The first five digits determines how the CD will behave, ie is it a retail cd that lets you clean install or upgrade, or an oem cd that only lets you perform a clean install? The last three digits determines what CD key it will accept. You are able to mix and match these values. For example you could make a WinXP cd that acted like a retail cd, yet accepted OEM keys.

Now, for the actual values. Remember the first and last values are interchangable, but usually you'd keep them as a pair:

Retail = 51882 335
Volume License = 51883 270
OEM = 82503 OEM

So if you wanted a retail CD that took retail keys, the last line of your setupp.ini file would read:

Pid=51882335

And if you wanted a retail CD that took OEM keys, you'd use:

Pid=51882OEM

How do I get the "Administrator" name on Welcome Screen?
========================================================

To get Admin account on the "Welcome Screen" as well as the other usernames, make sure that there are no accounts logged in.

Press "ctrl-alt-del" twice and you should be able to login as administrator!

finally worked for me after i found out that all accounts have to be logged out first


Fix Movie Inteferance in AVI files
==================================

If you have any AVI files that you saved in Windows 9x, which have interference when opened in Windows XP, there is an easy fix to get rid of the interference:

Open Windows Movie Maker.
Click View and then click Options.
Click in the box to remove the check mark beside Automatically create clips.

Now, import the movie file that has interference and drag it onto the timeline. Then save the movie, and during the rerendering, the interference will be removed.

Create a Password Reset Disk
============================

If you’re running Windows XP Professional as a local user in a workgroup environment, you can create a password reset disk to log onto your computer when you forget your password. To create the disk:

Click Start, click Control Panel, and then click User Accounts.
Click your account name.
Under Related Tasks, click Prevent a forgotten password.

Follow the directions in the Forgotten Password Wizard to create a password reset disk.

Store the disk in a secure location, because anyone using it can access your local user account


Change Web Page Font Size on the Fly
====================================

If your mouse contains a wheel for scrolling, you can change font size on the fly when viewing a Web page. To do so:

Press and hold Ctrl. Scroll down (or towards yourself) to enlarge the font size. Scroll up (or away from yourself) to reduce the font size.

You might find it useful to reduce font size when printing a Web page, so that you can fit more content on the page.

WinXP Clear Page file on shutdown
=================================

WINXPCPS.REG (WinXP Clear Page file on shutdown)

This Registration (.REG) file clears the Page file when you power off the computer.
Restart Windows for these changes to take effect!
ALWAYS BACKUP YOUR SYSTEM BEFORE MAKING ANY CHANGES!

Browse to: HKEY_LOCAL_MACHINE \ System \ CurrentControlSet \ Control \ Session Manager \ Memory Management

and add the DWORD variable "ClearPageFileAtShutdown"=dword:00000001

You can also do this without reg hacking.
Go to Control panel Administartative tools, local security policy. then goto local policies ---> security options.
Then change the option for "Shutdown: Clear Virtual Memory Pagefile"


Group Policy for Windows XP
===========================One of the most full featured Windows XP configuration tools available is hidden right there in your system, but most people don't even know it exists. It's called the Local Group Policy Editor, or gpedit for short. To invoke this editor, select Start and then Run, then type the following:

gpedit.msc

After you hit ENTER, you'll be greeted by gpedit, which lets you modify virtually every feature in Windows XP without having to resort to regedit. Dig around and enjoy!


Forgetting What Your Files Are?
===============================

This procedure works under NTFS.

As times goes along you have a lot files on your computer. You are going to forget what they are. Well here is way to identify them as you scroll through Windows Explorer in the future.

This procedure works under NTFS.

1.. Open up a folder on your system that you want to keep track of the different files you might one to identify in the future.

2.. Under View make certain that you set it to the Details.

3.. Highlight the file you want to keep more information on. Right click the file and you will get a pop up menu. Click on properties.

4.. Click on the Summary Tab (make sure it says simple not advanced on the button in the box), You should now get the following fields,

Title,Subject, Author, Category, Keywords, Comments

You will see advanced also if you have changed it to simple, Here will be other fields you can fill in.

5.. Next you can fill in what ever field you want.

6.. After you finished click the apply button then OK.

7.. Next right click the bar above your files, under the address barand you should get a drop down menu. Here you can click the fields you want to display.

8.. You should now see a list with the new fields and any comments you have done.

9.. Now if you want to sort these just right click a blank spot and then you sort the information to your liking.


Temporarily Assign Yourself Administrative Permissions
======================================================

Many programs require you to have Administrative permissions to be able to install them. Here is an easy way to temporarily assign yourself Administrative permissions while you remain logged in as a normal user.

Hold down the Shift key as you right-click on the program’s setup file.

Click Run as.

Type in a username and password that have Administrative permissions.

This will also work on applications in the Start menu.

Create a Shortcut to Lock Your Computer
=======================================

Leaving your computer in a hurry but you don’t want to log off? You can double-click a shortcut on your desktop to quickly lock the keyboard and display without using CTRL+ALT+DEL or a screensaver.

To create a shortcut on your desktop to lock your computer:

Right-click the desktop.
Point to New, and then click Shortcut.

The Create Shortcut Wizard opens. In the text box, type the following:
rundll32.exe user32.dll,LockWorkStation

Click Next.

Enter a name for the shortcut. You can call it "Lock Workstation" or choose any name you like.

Click Finish.

You can also change the shortcut's icon (my personal favorite is the padlock icon in shell32.dll).

To change the icon:

Right click the shortcut and then select Properties.
Click the Shortcut tab, and then click the Change Icon button.

In the Look for icons in this file text box, type:
Shell32.dll.

Click OK.

Select one of the icons from the list and then click OK

You could also give it a shortcut keystroke such CTRL+ALT+L. This would save you only one keystroke from the normal command, but it could be more convenient.


Create a Shortcut to Start Remote Desktop
=========================================

Tip: You can add a shortcut to the desktop of your home computer to quickly start Remote Desktop and connect to your office computer.

To create a shortcut icon to start Remote Desktop

Click Start, point to More Programs, point to Accessories, point to Communications, and then click on Remote Desktop Connection.

Click Options.

Configure settings for the connection to your office computer.

Click Save As, and enter a name, such as Office Computer. Click Save.

Open the Remote Desktops folder.

Right-click on the file named Office Computer, and then click Create Shortcut.

Drag the shortcut onto the desktop of your home computer.

To start Remote Desktop and connect to your office computer, double-click on the shortcut


Instantly Activate a Screensaver
================================

Turn on a screensaver without having to wait by adding a shortcut to your desktop:

Click the Start button, and then click Search.
In the Search Companion window, click All file types.

In the file name box, type *.scr

In the Look in box, choose Local Hard Drives (C or the drive where you have system files stored on your computer.

Click Search.

You will see a list of screensavers in the results. Pick a screensaver you want. You can preview it by double-clicking it.

Right click on the file, choose Send To, and then click Desktop (create shortcut).

To activate the screensaver, double-click the icon on your desktop


Add a Map Drive Button to the Toolbar
=====================================

Do you want to quickly map a drive, but can’t find the toolbar button? If you map drives often, use one of these options to add a Map Drive button to the folder toolbar.

Option One (Long Term Fix)

Click Start, click My Computer, right-click the toolbar, then unlock the toolbars, if necessary.

Right-click the toolbar again, and then click Customize.

Under Available toolbar buttons, locate Map Drive, and drag it into the position you want on the right under Current toolbar buttons.

Click Close, click OK, and then click OK again.

You now have drive mapping buttons on your toolbar, so you can map drives from any folder window. To unmap drives, follow the above procedure, selecting Disconnect under Available toolbar buttons. To quickly map a drive, try this option.

Option Two (Quick Fix)

Click Start, and right-click My Computer.
Click Map Network Drive.

If you place your My Computer icon directly on the desktop, you can make this move in only two clicks!


Software not installing?
========================

If you have a piece of software that refuses to install because it says that you are not running Windows 2000 (such as the Win2K drivers for a Mustek scanner!!) you can simply edit HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/Windows NT/CurrentVersion/ProductName to say Microsoft Windows 2000 instead of XP and it will install. You may also have to edit the version number or build number, depending on how hard the program tries to verify that you are installing on the correct OS. I had to do this for my Mustek 600 CP scanner (compatibility mode didn''t help!!!) and it worked great, so I now have my scanner working with XP (and a tech at Mustek can now eat his words).

BTW, don''t forget to restore any changes you make after you get your software installed

You do this at your own risk.

Use your Windows Key
====================

The Windows logo key, located in the bottom row of most computer keyboards is a little-used treasure. Don''t ignore it. It is the shortcut anchor for the following commands:

Windows: Display the Start menu
Windows + D: Minimize or restore all windows
Windows + E: Display Windows Explorer
Windows + F: Display Search for files
Windows + Ctrl + F: Display Search for computer
Windows + F1: Display Help and Support Center
Windows + R: Display Run dialog box
Windows + break: Display System Properties dialog box
Windows + shift + M: Undo minimize all windows
Windows + L: Lock the workstation
Windows + U: Open Utility Manager
Windows + Q: Quick switching of users (Powertoys only)
Windows + Q: Hold Windows Key, then tap Q to scroll thru the different users on your pc


Change your cd key
==================
You don't need to re-install if you want to try the key out ... just do this:

1. Go to Activate Windows
2. Select the Telephone option
3. Click "Change Product Key"
4. Enter NOT ALLOWED ~ Zabref
5. Click "Update"

Now log off and log back in again. It should now show 60 days left, minus the number of days it had already counted down.

Note: If your crack de-activated REGWIZC.DLL and LICDLL.DLL, you are going to have to re-register them.



Remove the Shared Documents folders from My Computer
====================================================
One of the most annoying things about the new Windows XP user interface is that Microsoft saw fit to provide links to all of the Shared Documents folders on your system, right at the top of the My Computer window. I can't imagine why this would be the default, even in a shared PC environment at home, but what's even more annoying is that you cannot change this behavior through the sh*ll
: Those icons are stuck there and you have to live with it.
Until now, that is.

Simply fire up the Registry Editor and navigate to the following key:
HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows \ CurrentVersion \ Explorer \ My Computer \ NameSpace \ DelegateFolders

You'll see a sub-key named {59031a47-3f72-44a7-89c5-5595fe6b30ee}. If you delete this, all of the Shared Documents folders (which are normally under the group called "Other Files Stored on This Computer" will be gone.

You do not need to reboot your system to see the change.

Before: A cluttered mess with icons no one will ever use (especially that orpaned one). After: Simplicity itself, and the way it should be by default.


This tip For older XP builds
===================
Edit or remove the "Comments" link in window title bars

During the Windows XP beta, Microsoft has added a "Comments?" hyperlink to the title bar of each window in the system so that beta testers can more easily send in a problem report about the user interface. But for most of us, this isn't an issue, and the Comments link is simply a visual distraction. And for many programs that alter the title bar, the Comments link renders the Minimize, Maximize, and Close window buttons unusable, so it's actually a problem.
Let's get rid of it. Or, if you're into this kind of thing, you can edit it too.

Open the Registry Editor and navigate to the following keys:
My Computer \ HKEY_CURRENT_USER \ Control Panel \ Desktop \ LameButtonEnabled
My Computer \ HKEY_CURRENT_USER \ Control Panel \ Desktop \ LameButtonText

The first key determines whether the link appears at all; change its value to 0 to turn it off. The second key lets you have a little fun with the hyperlink; you can change the text to anything you'd like, such as "Paul Thurrott" or whatever.

Editing either value requires a restart before the changes take effect.


Before: An unnecessary hyperlink. Have some fun with it! Or just remove it entirely. It's up to you.

Rip high-quality MP3s in Windows Media Player 8
================================================

The relationship between Windows Media Player 8 and the MP3 audio format is widely misunderstood. Basically, WMP8 will be able to playback MP3 files, but encoding (or "ripping" CD audio into MP3 format will require an MP3 plug-in. So during the Windows XP beta, Microsoft is supplying a sample MP3 plug-in for testing purposes, but it's limited to 56 Kbps rips, which is pretty useless. However, if you have an externally installed MP3 codec, you can use WMP8 to rip at higher bit rates. But you'll have to edit the Registry to make this work.
Fire up the Registry Editor and navigate to the following key:
HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ MediaPlayer \ Settings \ MP3Encoding

Here, you'll see sub-keys for LowRate and LowRateSample, which of course equates to the single 56 Kbps sample rate you see in WMP8. To get better sampling rates, try adding the following keys (Using New then DWORD value):

"LowRate" = DWORD value of 0000dac0
"MediumRate" = DWORD value of 0000fa00
"MediumHighRate" = DWORD value of 0001f400
"HighRate" = DWORD value of 0002ee00

Now, when you launch WMP8 and go into Tools, then Options, then Copy Music, you will have four encoding choices for MP3: 56 Kbps, 64 Kbps, 128 Kbps, and 192 Kbps. Note that you will not get higher bit rate encoding unless you have installed an MP3 codec separately; the version in Windows Media Player 8 is limited to 56 Kbps only.


Find the appropriate location in the Registry... ...add a few DWORD values... ...And then you'll be ripping CDs in higher-quality MP3 format!


Speed up the Start Menu
=======================

The default speed of the Start Menu is pretty slow, but you can fix that by editing a Registry Key. Fire up the Registry Editor and navigate to the following key:
HKEY_CURRENT_USER \ Control Panel \ Desktop \ MenuShowDelay

By default, the value is 400. Change this to a smaller value, such as 0, to speed it up.


Speed up the Start Menu (Part two)
==================================

If your confounded by the slow speed of the Start Menu, even after using the tip above, then you might try the following: Navigate to Display Properties then Appearance then Advanced and turn off the option titled Show menu shadow . You will get much better overall performance.


Speed up Internet Explorer 6 Favorites
======================================

For some reason, the Favorites menu in IE 6 seems to slow down dramatically sometimes--I've noticed this happens when you install Tweak UI 1.33, for example, and when you use the preview tip to speed up the Start menu. But here's a fix for the problem that does work, though it's unclear why:
Just open a command line window (Start button -> Run -> cmd) and type sfc, then hit ENTER. This command line runs the System File Checker, which performs a number of services, all of which are completely unrelated to IE 6. But there you go: It works.

Do an unattended installation
=============================
The Windows XP Setup routine is much nicer than that in Windows 2000 or Windows Me, but it's still an hour-long process that forces you to sit in front of your computer for an hour, answering dialog boxes and typing in product keys. But Windows XP picks up one of the more useful features from Windows 2000, the ability to do an unattended installation, so you can simply prepare a script that will answer all those dialogs for you and let you spend some quality time with your family.
I've written about Windows 2000 unattended installations and the process is pretty much identical on Windows XP, so please read that article carefully before proceeding. And you need to be aware that this feature is designed for a standalone Windows XP system: If you want to dual-boot Windows XP with another OS, you're going to have to go through the interactive Setup just like everyone else: An unattended install will wipe out your hard drive and install only Windows XP, usually.

To perform an unattended installation, you just need to work with the Setup Manager, which is located on the Windows XP CD-ROM in D:\SupportTools\DEPLOY.CAB by default: Extract the contents of this file and you'll find a number of useful tools and help files; the one we're interested in is named setupmgr.exe. This is a very simple wizard application that will walk you through the process of creating an answer file called winnt.sif that can be used to guide Windows XP Setup through the unattended installation.

One final tip: There's one thing that Setup Manager doesn't add: Your product key. However, you can add this to the unattend.txt file manually. Simply open the file in Notepad and add the following line under the [UserData] section:

ProductID=RK7J8-2PGYQ-P47VV-V6PMB-F6XPQ

(This is a 60 day cd key)

Then, just copy winnt.sif to a floppy, put your Windows XP CD-ROM in the CD drive, and reboot: When the CD auto-boots, it will look for the unattend.txt file in A: automatically, and use it to answer the Setup questions if it's there.

Finally, please remember that this will wipe out your system! Back up first, and spend some time with the help files in DEPLOY.CAB before proceeding.

For Older builds or not using setupreg.hiv file
===============================================

Remove the Desktop version text

During the Windows XP beta, you will see text in the lower right corner of the screen that says Windows XP Professional, Evaluation Copy. Build 2462 or similar. A lot of people would like to remove this text for some reason, and while it's possible to do so, the cure is more damaging than the problem, in my opinion. So the following step will remove this text, but you'll lose a lot of the nice graphical effects that come in Windows XP, such as the see-through icon text.

To remove the desktop version text, open Display Properties (right-click the desktop, then choose Properties) and navigate to the Desktop page. Click Customize Desktop and then choose the Web page in the resulting dialog. On this page, check the option titled Lock desktop items. Click OK to close the dialog, and then OK to close Display Properties. The text disappears. But now the rest of your system is really ugly. You can reverse the process by unchecking Lock desktop items.

There's also a shortcut for this process: Just right-click the desktop and choose Arrange by then Lock Web Icons on the Desktop.


--------------------------------------------------------------------------------
Enable ClearType on the Welcome Screen!
=======================================

As laptop users and other LCD owners are quickly realizing, Microsoft's ClearType technology in Windows XP really makes a big difference for readability. But the this feature is enabled on a per-user basis in Windows XP, so you can't see the effect on the Welcome screen; it only appears after you logon.

But you can fix that. Fire up the Registry Editor and look for the following keys:

(default user) HKEY_USERS \ .Default \ Control Panel \ Desktop \ FontSmoothing (String Value)
HKEY_USERS \ .Default \ Control Panel \ Desktop \ FontSmoothingType (Hexadecimal DWORD Value)

Make sure both of these values are set to 2 and you'll have ClearType enabled on the Welcome screen and on each new user by default.


Stop Windows Messenger from Auto-Starting
=========================================

If you're not a big fan of Windows Messenger simply delete the following Registry Key:

HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run\MSMSGS


Display Hibernate Option on the Shut Down dialog
================================================
For some reason, Hibernate may not be available from the default Shut Down dialog. But you can enable it simply enough, by holding down the SHIFT key while the dialog is visible. Now you see it, now you don't!

Add album art to any music folder
=================================

One of the coolest new features in Windows XP is its album thumbnail generator, which automatically places the appropriate album cover art on the folder to which you are copying music (generally in WMA format). But what about those people that have already copied their CDs to the hard drive using MP3 format? You can download album cover art from sites such as cdnow.com or amguide.com, and then use the new Windows XP folder customize feature to display the proper image for each folder. But this takes time--you have to manually edit the folder properties for every single folder--and you will lose customizations if you have to reinstall the OS. There's an excellent fix, however.

When you download the album cover art from the Web, just save the images as folder.jpg each time and place them in the appropriate folder. Then, Windows XP will automatically use that image as the thumbnail for that folder and, best of all, will use that image in Windows Media Player for Windows XP (MPXP) if you choose to display album cover art instead of a visualization. And the folder customization is automatic, so it survives an OS reinstallation as well. Your music folders never looked so good!

Album cover art makes music folder thumbnails look better than ever!


Change the location of the My Music or My Pictures folders
==========================================================

In Windows 2000, Microsoft added the ability to right-click the My Documents folder and choose a new location for that folder in the sh*ll
. With Windows XP, Microsoft has elevated the My Music and My Pictures folders to the same "special sh*ll
folder" status of My Documents, but they never added a similar (and simple) method for changing those folder's locations. However, it is actually pretty easy to change the location of these folders, using the following method.

Open a My Computer window and navigate to the location where you'd like My Music (or My Pictures) to reside. Then, open the My Documents folder in a different window. Drag the My Music (or My Pictures) folder to the other window, and Windows XP will update all of the references to that folder to the new location, including the Start menu.

Or use Tweak UI


Add/Remove optional features of Windows XP
==========================================
To dramatically expand the list of applications you can remove from Windows XP after installation, navigate to C:\WINDOWS\inf (substituting the correct drive letter for your version of Windows) and open the sysoc.inf file. Under Windows XP Professional Edition RC1, this file will resemble the following by default:

[Version] Signature = "$Windows NT$"
DriverVer=06/26/2001,5.1.2505.0

[Components]
NtComponents=ntoc.dll,NtOcSetupProc,,4
WBEM=ocgen.dll,OcEntry,wbemoc.inf,hide,7
Display=desk.cpl,DisplayOcSetupProc,,7
Fax=fxsocm.dll,FaxOcmSetupProc,fxsocm.inf,,7
NetOC=netoc.dll,NetOcSetupProc,netoc.inf,,7
iis=iis.dll,OcEntry,iis.inf,,7
com=comsetup.dll,OcEntry,comnt5.inf,hide,7
dtc=msdtcstp.dll,OcEntry,dtcnt5.inf,hide,7
IndexSrv_System = setupqry.dll,IndexSrv,setupqry.inf,,7
TerminalServer=TsOc.dll, HydraOc, TsOc.inf,hide,2
msmq=msmqocm.dll,MsmqOcm,msmqocm.inf,,6
ims=imsinsnt.dll,OcEntry,ims.inf,,7
fp_extensions=fp40ext.dll,FrontPage4Extensions,fp40ext.inf,,7
AutoUpdate=ocgen.dll,OcEntry,au.inf,hide,7
msmsgs=msgrocm.dll,OcEntry,msmsgs.inf,hide,7
msnexplr=ocmsn.dll,OcEntry,msnmsn.inf,,7
smarttgs=ocgen.dll,OcEntry,msnsl.inf,,7
RootAutoUpdate=ocgen.dll,OcEntry,rootau.inf,,7
Games=ocgen.dll,OcEntry,games.inf,,7
AccessUtil=ocgen.dll,OcEntry,accessor.inf,,7
CommApps=ocgen.dll,OcEntry,communic.inf,HIDE,7
MultiM=ocgen.dll,OcEntry,multimed.inf,HIDE,7
AccessOpt=ocgen.dll,OcEntry,optional.inf,HIDE,7
Pinball=ocgen.dll,OcEntry,pinball.inf,HIDE,7
MSWordPad=ocgen.dll,OcEntry,wordpad.inf,HIDE,7
ZoneGames=zoneoc.dll,ZoneSetupProc,igames.inf,,7

[Global]
WindowTitle=%WindowTitle%
WindowTitle.StandAlone="*"

The entries that include the text hide or HIDE will not show up in Add/Remove Windows Components by default. To fix this, do a global search and replace for ,hide and change each instance of this to , (a comma). Then, save the file, relaunch Add/Remove Windows Components, and tweak the installed applications to your heart's content.

Cool, eh? There are even more new options now under "Accessories and Utilities" too.


Remove Windows Messenger
========================

It seems that a lot of people are interested in removing Windows Messenger for some reason, though I strongly recommend against this: In Windows XP, Windows Messenger will be the hub of your connection to the .NET world, and now that this feature is part of Windows, I think we're going to see a lot of .NET Passport-enabled Web sites appearing as well. But if you can't stand the little app, there are a couple of ways to get rid of it, and ensure that it doesn't pop up every time you boot into XP. The best way simply utilizes the previous tip:

If you'd like Windows Messenger to show up in the list of programs you can add and remove from Windows, navigate to C:\WINDOWS\inf (substituting the correct drive letter for your version of Windows) and open sysoc.inf (see the previous tip for more information about this file). You'll see a line that reads:

msmsgs=msgrocm.dll,OcEntry,msmsgs.inf,hide,7

Change this to the following and Windows Messenger will appear in Add or Remove Programs, then Add/Remove Windows Components, then , and you can remove it for good:

msmsgs=msgrocm.dll,OcEntry,msmsgs.inf,7





Thanks: mohit gupta(hakingtips.blogspot.com  )

How To Reinstall Windows Without Losing Anything

Here Is Another Possible Solution:easy way and tested:

1- Start WindowsXP
2- Go to the location of your source files
3- Run WINNT32 /unattend
For example, D:\I386\winnt32 /unattend ( copy & paste this command into the RUN box, then press ENTER ) Your computer will do the rest.
Or,
Start > All Programs > Accessories > Command Prompt.

Copy & paste > D:\I386\winnt32 /unattend
Press Enter.
If you have i386 on your drive, you can replace D: ( if D: is your cd drive ) with the location of it.
I've often need to do this to repair something that had gotten corrupted and didn't want to do a clean install.

D: is the driver letter where your windows XP Cd is
if D:\I386\winnt32 /unattend doesn't work then try : d:\winnt32 /unattend.





Thanks : mohit gupta(hakingtips.blogspot.com )

Tracking Emails

Code:

class="smller">tracking emails u send see this

MailTracking.com -

What is it and how does it work? What is
MailTracking? MailTracking is the most powerful and reliable email
tracking service that exists today. In short - MailTracking tells you
when email you sent gets read / re-opened / forwarded and so much more

How do I send a tracked email? There are two ways you can send tracked emails:
Simply add: .mailtracking.com to the end of your recipients email address (they won't see this)
or
Install our ActiveTracker plugin to add the tracking for you.
Testing?

If you send tracked emails to yourself, your anti-spam filters may
block them (people don't usually write to themselves) - so we recommend
you test by sending to other people. What will you tell me about the
tracked emails I send? MailTracking will endeavour to provide the
following in your tracking reports:

Date and time opened
Location of recipient (per their ISP city /town)
Map of location (available on paid subscriptions)
Recipients IP address
Apparent email address of opening (if available)
Referrer details (ie; if accessed via web mail etc)
URL clicks
How long the email was read for
How many times your email was opened
If your email was forwarded, or opened on a different computer
All
messages sent via MailTracking benefit from our SPF compliant and
Sender-ID compliant mail servers. This confirms safe transmission of
your messages, and also enables us to report delivery status to you
(including: bounce-backs, delays and success notifications). Delivery
information is listed in your Personal Tracking Page. Note:
MailTracking.com does not use or contain any sp*y-ware, ma*l-ware, nor
vi*rues, it is not ill*egal to use, and does not breach any pri*vacy
reg*ulations in any countries. What else does MailTracking do? There
are lots of great features available to you - these include the
following sending options:

Certified email
Ensured-Receipts and retractable emails
Invisible tracking
Self-Destructing emails
Block printing
Block forwarding
Adobe Acrobat PDF Document Tracking
Secure Encypted emails
Track MS Word or Excel documents

You can also choose how to receive your receipts:
In your Personal Tracking Page (when you log in)
Email ReadNotifications
Legal Proof-of-Opening receipts
Delivery Service Notifications (DSN's)
SMS alert on your cell-phone or pager
Instant Messenger
These
options are available to you from "My Account" in Member Utilities.
Getting started MailTracking offers a lot of features and sending
options, but it is very easy to use our service. On start up, your
account is already configured per our 'Recommended' tracking defaults -
and we will automatically send you email ReadNotifications when your
tracked emails are opened. If you'd like to take us for a 'test drive',
please sign up for no-obligation free trial from the MailTracking.com 
Homepage





Thanks: mohit gupta , hakingtips.blogspot.com  

How To Enable 'Recover Deleted Item' Option in OUTLOOK

How To Enable 'Recover Deleted Item' Option 


Normally this Recovering Deleted Emails option will be disabled in the outlook.

You need to enable this for the recovery. For that, you can do the followings,

1. 
Exit Outlook.

2. 
Open the Windows registry editor.

3. Browse to: 
MyComputer\HKEY_LOCAL_MACHINE\Software\Microsoft\Exchange\Client\Options.

4. On the 
Edit menu, point to New, and then click DWORD Value.

5. Type the name 
DumpsterAlwaysOn.

Note: Do not type any spaces in the name.

6. Set the DWORD value to 1.

7. Restart Outlook.

The Tools menu now has the 
Recover Deleted Items command for every Outlook folder.

Veritas Backup Exec 10 CBT


The Veritas Backup Exec 10.x for Windows Servers course provides students with comprehensive instruction to install and configure Backup Exec 10.x. Students will create policies, run backup jobs, and create and run restore jobs. In addition, tape configuration and media rotation methods will be covered,as will troubleshooting of Backup Exec.

Who Can Benefit
System administrators, system engineers, technical support personnel, consultants, network administrators, backup administrators, backup operators, and othes who will be responsible for installing, configuring and administering Backup Exec 10.x for Windows Servers.

Prerequisites
Attendees should be familiar with the administration and configuration of the Widows 2000 and Windows 2003 platforms, and should have experience configuring server software and hardware. Attendees should have knowledge of Windows 2000 and Windows 2003 system administration, including domain security. Active Directory is recommended.

Skills Gained
Upon completion of this course, students should be able to:

* Define the architecture and concepts of Backup Exec
* Install and configure Backup Exec
* Manage devices and media
* Configure job policies and templates
* Complete a backup
* Complete a restore
* Design a Backup Exec environment to fit your company's needs

Related Courses

Before:
* VERITAS NetBackup 5.x for UNIX Administration (VT-266)

Course Content

Module 1 - Course Introduction

* Backup Exec Administration
* VERITAS' Education and Support Resources
* The Backup Exec Environment

Module 2 - Product Overview

* What is Backup Exec?
* What's New in Backup Exec 10?
* Backup Exec Agents
* Backup Exec Options

Module 3 - Backup Exec Architecture and Concepts

* Backup Exec Architecture
* Backup Exec Terminology
* Backup Exec Concepts

Module 4 - Installing and Configuring Backup Exec

* Preinstallation Considerations
* Installing Backup Exec
* Configuring Backup Exec
* Installing Agents and Options
* Uninstalling and Upgrading Backup Exec
* Troubleshooting Installation Issues

Module 5 - Planning a Backup Strategy

* Backup Terms and Concepts Review
* Backup Strategy Concerns

Module 6 - Managing Devices

* Configuring Devices
* Creating Device Pools
* Configuring Device Properties
* Updating Device Drivers

Module 7 - Managing Media

* Media Terms and Concepts
* Selecting Data for Overwrite Operations
* Configuring Media Sets
* Media Operations
* Troubleshooting Media Issues

Module 8 - Creating Backup Jobs

* Minimum Requirements for Backup Jobs
* General Backup Job Settings
* Creating Selection Lists
* Device and Media Properties
* Scheduling Jobs
* Test Run Jobs

Download: 137.09 MB / 50.5 MB
CODE
http://rapidshare.com/files/51541244/VERITAS10_-_Video_Training.part1.rar
http://rapidshare.com/files/51544227/VERITAS10_-_Video_Training.part2.rar
http://rapidshare.com/files/51545924/VERITAS10_-_Video_Training.part3.rar

or

CODE
http://www.MegaShare.com/142395
http://www.MegaShare.com/142420
http://www.MegaShare.com/142409

Download Router Sim Network Visualizer v6 [Download, Includes New Exercises]

 Download Router Sim Network Visualizer v6 [Download, Includes New Exercises]





 Direct Download:

http://digiex.net/attachments/applications/742d1225721945-router-sim-network-visualizer-v6-download-includes-exercises-routersimnetworkvisualizer-v6.0.rar

Acronis True Image Home 12.0.0.9615

Acronis True Image Home 2009 is an award-winning backup and recovery solution for a good reason: it protects your PC after just one click and allows you to recover from viruses, unstable software downloads, and failed hard drives. Create an exact copy of your PC and restore it from a major failure in minutes, or back up important files and recover them even faster.

Acronis True Image Home 2009 Build 12.0.0.9615

program + serial
Links/Downloads/Codes:
http://rapidshare.com/files/165751620/Acronis_True_Image_Home_2009_Build_12.0.0.9615.rar
Patches

Links/Downloads/Codes:
http://rapidshare.com/files/156025104/9615patches.rar

Windows XP Pro SP3 Full Untouched October 2008






Info:
- Bootable ISO file.
- Unattended setup.
- Pre-Activated, so you don't need any activation trick.
- CD-KEY (original Volume License Key) is integrated so you don't have to enter anything. SO YOU CAN USE AUTOMATIC UPDATES!

Windows XP Service Pack 3 (SP3) build 5512 was released to manufacturing on April 21, 2008, and Microsoft planned to make it available to the general public on April 29, 2008 via Windows Update and the Microsoft Download Center. However, due to a compatibility issue with Microsoft Dynamics Retail Management System, the release of Windows XP Service Pack 3 was delayed. A feature set overview has been posted by Microsoft and details new features available separately as standalone updates to Windows XP, as well as features backported from Windows Vista, such as black hole router detection, Network Access Protection, and Windows Imaging Component. Microsoft is reporting that over 1,000 fixes have been packed into SP3 along with some performance improvements as well. Internet Explorer 7 is not included as part of SP3.

New features:
- Black hole router detection.
- Network Access Protection.
- Credentials security service provider.
- Descriptive security options control panel.
- Enhanced security for Administrator and Service policy entries.
- Microsoft Kernel Mode Cryptographic Module.
- Installing without needing a Product Key during Setup.

A full list of new and integrated features is available on the Microsoft web site.

With the release of SP3, retail and OEM versions of Windows XP with service pack 3 slip streamed into them can be installed and run with full functionality for 30 days without a product key, after which time the user will be prompted to enter a valid key and activate the installation. Volume license versions still require entering a product key.

Microsoft noted SP3 can be installed on systems with Internet Explorer version 6 as well as version 7, and similarly Windows Media Player 9 Series or Windows Media Player versions 10 or 11. Although service packs have, until now, been cumulative, installing Windows XP Service Pack 3 requires that the PC must at least be running Windows XP with Service Pack 1 installed. However, it is possible to slipstream SP3 into the Windows XP setup files at any service pack level including the original RTM version without any errors or issues. Slip streaming into Windows XP Media Center Edition 2005 is not supported. SP3 does contain operating system component updates for Windows XP Media Center Edition and for Windows XP Tablet PC Edition including security updates for .NET Framework versions 1.0 and 1.1 which are included in these Windows XP SKUs. However it does not include update rollups for the Windows Media Center app. in Windows XP Media Center Edition 2005. It also omits Windows Media Player 10 security updates although Windows Media Player 10 is included in Windows XP Media Center Edition 2005.

There are a total of 1,073 fixes in Service Pack 3.

The Service Pack 3 RTM is integrated by Microsoft itself.

Download:
Links/Downloads/Codes:
http://www.maishare.com/qmkwjr1b2pnu/Windows_XP_Pro_SP3_Full_Untouched_October_2008.part1.rar.html
http://www.maishare.com/3lcq85prrly4/Windows_XP_Pro_SP3_Full_Untouched_October_2008.part2.rar.html
http://www.maishare.com/h74q4fjz0kto/Windows_XP_Pro_SP3_Full_Untouched_October_2008.part3.rar.html
http://www.maishare.com/yhpr7osrkpma/Windows_XP_Pro_SP3_Full_Untouched_October_2008.part4.rar.html
http://www.maishare.com/v8o1384hvqx0/Windows_XP_Pro_SP3_Full_Untouched_October_2008.part5.rar.html

Sharepoint Interview Questions


What is Microsoft Windows SharePoint Services? How is it related to Microsoft Office SharePoint Server 2007?
Windows SharePoint Services is the solution that enables you to create Web sites for information sharing and document collaboration. Windows SharePoint Services — a key piece of the information workerinfrastructure delivered in Microsoft Windows Server 2003 — provides additional functionality to the Microsoft Office system and other desktop applications, and it serves as a platform for application development.
Office SharePoint Server 2007 builds on top of Windows SharePoint Services 3.0 to provide additional capabilities including collaboration, portal, search, enterprise content management, business process and forms, and business intelligence.
What is Microsoft SharePoint Portal Server?
SharePoint Portal Server is a portal server that connects people, teams, and knowledge across business processes. SharePoint Portal Server integrates information from various systems into one secure solution through single sign-on and enterprise application integrationcapabilities. It provides flexible deployment and management tools, and facilitates end-to-end collaboration through data aggregation, organization, and searching. SharePoint Portal Server also enables users to quickly find relevant information through customization and personalization of portal content and layout as well as through audience targeting.
What is Microsoft Windows Services?
Microsoft Windows Services is the engine that allows administrators to create Web sites for information sharing and document collaboration. Windows SharePoint Services provides additional functionality to the Microsoft Office System and other desktop applications, as well as serving as a plat form for application development. SharePoint sites provide communities for team collaboration, enabling users to work together on documents, tasks, and projects. The environment for easy and flexible deployment, administration, and application development.
What is the relationship between Microsoft SharePoint Portal Server and Microsoft Windows Services?
Microsoft SharePoint Products and Technologies (including SharePoint Portal Server and Windows SharePoint Services) deliver highly scalable collaboration solutions with flexible deployment and management tools. Windows SharePoint Services provides sites for team collaboration, while Share Point Portal Server connects these sites, people, and business processes—facilitating knowledge sharing and smart organizations. SharePoint Portal Server also extends the capabilities of Windows SharePoint Services by providing organizational and management tools for SharePoint sites, and by enabling teams to publish information to the entire organization.
Who is Office SharePoint Server 2007 designed for?
Office SharePoint Server 2007 can be used by information workers, IT administrators, and application developers.
What are the main benefits of Office SharePoint Server 2007?
Office SharePoint Server 2007 provides a single integrated platform to manage intranet, extranet, and Internet applications across the enterprise.
* Business users gain greater control over the storage, security, distribution, and management of their electronic content, with tools that are easy to use and tightly integrated into familiar, everyday applications.
* Organizations can accelerate shared business processes with customers and partners across organizational boundaries using InfoPath Forms Services–driven solutions.
* Information workers can find information and people efficiently and easily through the facilitated information-sharing functionality and simplified content publishing. In addition, access to back-end data is achieved easily through a browser, and views into this data can be personalized.
* Administrators have powerful tools at their fingertips that ease deployment, management, and system administration, so they can spend more time on strategic tasks.
* Developers have a rich platform to build a new class of applications, called Office Business Applications, that combine powerful developer functionality with the flexibility and ease of deployment of Office SharePoint Server 2007. Through the use of out-of-the-box application services, developers can build richer applications with less code.
What is the difference between Microsoft Office SharePoint Server 2007 for Internet sites and Microsoft Office SharePoint Server 2007?
Microsoft Office SharePoint Server 2007 for Internet sites and Microsoft Office SharePoint Server 2007 have identical feature functionality. While the feature functionality is similar, the usage rights are different.
If you are creating an Internet, or Extranet, facing website, it is recommended that you use Microsoft Office SharePoint Server 2007 for Internet sites which does not require the purchase client access licenses. Websites hosted using an “Internet sites” edition can only be used for Internet facing websites and all content, information, and applications must be accessible to non-employees. Websites hosted using an “Internet sites” edition cannot be accessed by employees creating, sharing, or collaborating on content which is solely for internal use only, such as an Intranet Portal scenario. See the previous section on licensing for more information on the usage scenarios.
What suites of the 2007 Microsoft Office system work with Office SharePoint Server 2007?
Office Outlook 2007 provides bidirectional offline synchronization with SharePoint document libraries, discussion groups, contacts, calendars, and tasks.
Microsoft Office Groove 2007, included as part of Microsoft Office Enterprise 2007, will enable bidirectional offline synchronization with SharePoint document libraries.
Features such as the document panel and the ability to publish to Excel Services will only be enabled when using Microsoft Office Professional Plus 2007or Office Enterprise 2007.
Excel Services will only work with documents saved in the new Office Excel 2007 file format (XLSX).
How do I invite users to join a Windows SharePoint Services Site? Is the site secure?
SharePoint-based Web sites can be password-protected to restrict access to registered users, who are invited to join via e-mail. In addition, the site administrator can restrict certain members’ roles by assigning different permission levels to view post and edit.
Can I post any kind of document?
You can post documents in many formats, including .pdf, .htm and .doc. In addition, if you are using Microsoft Office XP, you can save documents directly to your Windows SharePoint Services site.
Can I download information directly from a SharePoint site to a personal digital assistant (PDA)?
No you cannot. However, you can exchange contact information lists with Microsoft Outlook.
How long does it take to set up the initial team Web site?
It only takes a few minutes to create a complete Web site. Preformatted forms let you and your team members contribute to the site by filling out lists. Standard forms include announcements, events, contacts, tasks, surveys, discussions and links.
Can I create custom templates?
Yes you can. You can have templates for business plans, doctor’s office, lawyer’s office etc.
How can I make my site public? By default, all sites are created private.
If you want your site to be a public Web site, enable anonymous access for the entire site. Then you can give out your URL to anybody in your business card, e-mail or any other marketing material. The URL for your Web site will be: http:// yoursitename.wss.bcentral.com
Hence, please take special care to name your site. These Web sites are ideal for information and knowledge intensive sites and/or sites where you need to have shared Web workspace. Remember: Under each parent Web site, you can create up to 10 sub-sites each with unique permissions, settings and security rights.
How do the sub sites work?
You can create a sub site for various categories. For example:
* Departments - finance, marketing, IT
* Products - electrical, mechanical, hydraulics
* Projects - Trey Research, Department of Transportation, FDA
* Team - Retention team, BPR team
* Clients - new clients, old clients
* Suppliers - Supplier 1, Supplier 2, Supplier 3
* Customers - Customer A, Customer B, Customer C
* Real estate - property A, property B
The URLs for each will be, for example:
* http://yoursitename.wss.bcentral.com/finance
* http://yoursitename.wss.bcentral.com/marketing
You can keep track of permissions for each team separately so that access is restricted while maintaining global access to the parent site.
How do I make my site non-restricted?
If you want your site to have anonymous access enabled (i.e., you want to treat it like any site on the Internet that does not ask you to provide a user name and password to see the content of the site), follow these simple steps:
1. Login as an administrator
2. Click on site settings
3. Click on Go to Site Administration
4. Click on Manage anonymous access
5. Choose one of the three conditions on what Anonymous users can access:
*
o Entire Web site
o Lists and libraries
o Nothing
Default condition is nothing; your site has restricted access. The default conditions allow you to create a secure site for your Web site.
Can I get domain name for my Web site?
Unfortunately, no. At this point, we don’t offer domain names for SharePoint sites. But very soon we will be making this available for all our SharePoint site customers. Please keep checking this page for further update on this. Meanwhile, we suggest you go ahead and set up your site and create content for it.
What are picture libraries?
Picture libraries allow you to access a photo album and view it as a slide show or thumbnails or a film strip. You can have separate folder for each event, category, etc
What are the advantages of a hosted SharePoint vs. one that is on an in-house server?
* No hardware investment, i.e. lower costs
* No software to download - ready to start from the word go
* No IT resources - Anyone who has used a Web program like Hotmail can use it
* Faster deployment
Can I ask users outside of my organization to participate in my Windows SharePoint Services site?
Yes. You can manage this process using the Administration Site Settings. Simply add users via their e-mail alias and assign permissions such as Reader or Contributor.
Are there any IT requirements or downloads required to set up my SharePoint site?
No. You do not need to download any code or plan for any IT support. Simply complete the on-line signup process and provide us your current and correct email address. Once you have successfully signed up and your site has been provisioned, we will send a confirmation to the email address you provided.
I am located outside of the United States.
Are there any restrictions or requirements for accessing the Windows SharePoint Services?
No. There are no system or bandwidth limitations for international trial users. Additionally language packs have been installed which allow users to set up sub-webs in languages other than English. These include: Arabic, Danish, Dutch, Finnish, French, German, Hebrew, Italian, Japanese, Polish, Portuguese (Brazilian), Spanish and Swedish.
Are there any browser recommendations?
Yes. Microsoft recommends using the following browsers for viewing and editing Windows SharePoint Services sites: Microsoft Internet Explorer 5.01 with Service Pack 2, Microsoft Internet Explorer 5.5 with Service Pack 2, Internet Explorer 6, Netscape Navigator 6.2 or later.
What security levels are assigned to users?
Security levels are assigned by the administrator who is adding the user. There are four levels by default and additional levels can be composed as necessary.
* Reader - Has read-only access to the Web site.
* Contributor - Can add content to existing document libraries and lists.
* Web Designer - Can create lists and document libraries and customize pages in the Web site.
* Administrator - Has full control of the Web site.
How secure are Windows SharePoint Services sites hosted by Microsoft?
Microsoft Windows SharePoint Services Technical security measures provide firewall protection, intrusion detection, and web-publishing rules. The Microsoft operation center team tests and deploys software updates in order to maintain the highest level of security and software reliability. Software hot-fixes and service packs are tested and deployed based on their priority and level of risk. Security related hot-fixes are rapidly deployed into the environment to address current threats. A comprehensive software validation activity ensures software stability through regression testing prior to deployment.
What is the difference between an Internet and an intranet site?
An internet site is a normal site that anyone on the internet can access (e.g., www.msn.com, www.microsoft.com, etc.). You can set up a site for your company that can be accessed by anyone without any user name and password. The internet is used for public presence and a primary marketing tool managed typically by web programmers and a system administrator.
An intranet (or internal network), though hosted on a Web site, can only be accessed by people who are members of a specific network. They need to have a login and password that was assigned to them when they were added to the site by the site administrator. The intranet is commonly used as an internal tool for giving employees access to company information. Content is driven by business relevance, business rules and has increasingly become a common tool in larger organizations. An intranet is becoming more and more the preferred method for employees to interact with each other and the central departments in an organization, whether or not the organization has a Web presence.
What is a workspace?
A site or workspace is when you want a new place for collaborating on Web pages, lists and document libraries. For example, you might create a site to manage a new team or project, collaborate on a document or prepare for a meeting.
What are the various kinds of roles the users can have?
A user can be assigned one of the following roles
* Reader - Has read-only access to the Web site.
* Contributor - Can add content to existing document libraries and lists.
* Web Designer - Can create lists and document libraries and customize pages in the Web site.
* Administrator - Has full control of the Web site.
Can more than one person use the same login?
If the users sharing that login will have the same permissions and there is no fear of them sharing a password, then yes. Otherwise, this is discouraged.
How customizable is the user-to-user access?
User permissions apply to an entire Web, not to documents themselves. However, you can have additional sub webs that can optionally have their own permissions. Each user can be given any of four default roles. Additional roles can be defined by the administrator.
Can each user have access to their own calendar?
Yes there are two ways to do this,
* by creating a calendar for each user, or
* by creating a calendar with a view for each user
How many files can I upload?
There is no restriction in place except that any storage consumed beyond that provided by the base offering may have an additional monthly charge associated with them.
What types of files can I upload / post to the site?
The only files restricted are those ending with the following extensions: .asa, .asp, .ida, .idc, .idq. Microsoft reserves the right to add additionalfile types to this listing at any time. Also, no content that violates the terms of service may be uploaded or posted to the site.
Can SharePoint be linked to an external data source?
SharePoint data can be opened with Access and Excel as an external data source. Thus, SharePoint can be referenced as an external data source. SharePoint itself cannot reference an external data source.
Can SharePoint be linked to a SQL database?
SharePoint 2007 Portal Server (MOSS2K7) allows connections to SQL based datasources via the Business Data Catalog (BDC). The BDC also allows connecting to data via Web Services.
Can I customize my Windows SharePoint Services site?
YES! Windows SharePoint Services makes updating sites and their content from the browser easier then ever.
SharePoint includes tools that let you create custom lists, calendars, page views, etc. You can apply a theme; add List, Survey and Document Library Web Parts to a page; create personal views; change logos; connect Web Parts and more.
To fully customize your site, you can use Microsoft FrontPage 2003. Specifically, you can use FrontPage themes and shared borders, and also use FrontPage to create photo galleries and top ten lists, utilize standard usage reports, and integrate automatic Web content.
Will Microsoft Office SharePoint Server 2007 run on a 64-bit version of Microsoft Windows?
Windows SharePoint Services 3.0, Office SharePoint Server 2007, Office Forms Server 2007, and Office SharePoint Server 2007 for Search will support 64-bit versions of Windows Server 2003.
How Office SharePoint Server 2007 can help you?
Office SharePoint Server 2007 can help us:
Manage content and streamline processes. Comprehensively manage and control unstructured content like Microsoft Office documents, Web pages, Portable Document Format file (PDF) files, and e-mail messages. Streamline business processes that are a drain on organizational productivity.
Improve business insight. Monitor your business, enable better-informed decisions, and respond proactively to business events.
Find and share information more simply. Find information and expertise wherever they are located. Share knowledge and simplify working with others within and across organizational boundaries.
Empower IT to make a strategic impact. Increase responsiveness of IT to business needs and reduce the number of platforms that have to be maintained by supporting all the intranet, extranet, and Web applications across the enterprise with one integrated platform.
Office SharePoint Server 2007 capabilities can help improve organizational effectiveness by connecting people, processes, and information.
Office SharePoint Server 2007 provides these capabilities in an integrated server offering, so your organization doesn’t have to integrate fragmented technology solutions itself.
What are the features that the portal components of Office SharePoint Server 2007 include?
The portal components of Office SharePoint Server 2007 include features that are especially useful for designing, deploying, and managing enterprise intranet portals, corporate Internet Web sites, and divisional portal sites. The portal components make it easier to connect to people within the organization who have the right skills, knowledge, and project experience.
What are the advanced features of MOSS 2007?
* User Interface (UI) and navigation enhancements
* Document management enhancements
* The new Workflow engine
* Office 2007 Integration
* New Web Parts
* New Site-type templates
* Enhancements to List technology
* Web Content Management
* Business Data Catalog
* Search enhancements
* Report Center
* Records Management
* Business Intelligence and Excel Server
* Forms Server and InfoPath
* The “Features” feature
* Alternate authentication providers and Forms-based authentication
What are the features of the new Content management in Office SharePoint 2007?
The new and enhanced content management features in Office SharePoint Server 2007 fall within three areas:
* Document management
* Records management
* Web content management
Office SharePoint Server 2007 builds on the core document management functionality provided by Windows SharePoint Services 3.0, including check in and check out, versioning, metadata, and role-based granular access controls. Organizations can use this functionality to deliver enhanced authoring, business document processing, Web content management and publishing, records management, policy management, and support for multilingual publishing.
Does a SharePoint Web site include search functionality?
Yes. SharePoint Team Services provides a powerful text-based search feature that helps you find documents and information fast.
Write the features of the search component of Office SharePoint Server 2007?
The search component of Office SharePoint Server 2007 has been significantly enhanced by this release of SharePoint Products and Technologies. New features provide:
* A consistent and familiar search experience.
* Increased relevance of search results.
* New functions to search for people and expertise.
* Ability to index and search data in line-of-business applications and
* Improved manageability and extensibility.
What are the benefits of Microsoft Office SharePoint Server 2007?
* Provide a simple, familiar, and consistent user experience.
* Boost employee productivity by simplifying everyday business activities.
* Help meet regulatory requirements through comprehensive control over content.
* Effectively manage and repurpose content to gain increased business value.
* Simplify organization-wide access to both structured and unstructured information across disparate systems.
* Connect people with information and expertise.
* Accelerate shared business processes across organizational boundaries.
* Share business data without divulging sensitive information.
* Enable people to make better-informed decisions by presenting business-critical information in one central location.
* Provide a single, integrated platform to manage intranet, extranet, and Internet applications across the enterprise.
Will SharePoint Portal Server and Team Services ever merge?
The products will come together because they are both developed by the Office team.
What does partial trust mean the Web Part developer?
If an assembly is installed into the BIN directory, the code must be ensured that provides error handling in the event that required permissions are not available. Otherwise, unhandled security exceptions may cause the Web Part to fail and may affect page rendering on the page where the Web Part appears.
How can I raise the trust level for assemblies installed in the BIN directory?
Windows SharePoint Services can use any of the following three options from ASP.NET and the CLR to provide assemblies installed in the BIN directory with sufficient permissions. The following table outlines the implications and requirements for each option.
Option Pros Cons
Increase the trust level for the entire virtual server. For more information, see “Setting the trust level for a virtual server” Easy to implement.
In a development environment, increasing the trust level allows you to test an assembly with increased permissions while allowing you to recompile assemblies directly into the BIN directory without resetting IIS. This option is least secure.
This option affects all assemblies used by the virtual server. There is no guarantee the destination server has the required trust level. Therefore, Web Parts may not work once installed on the destination server.
Create a custom policy file for your assemblies. For more information, see “How do I create a custom policy file?” Recommended approach.
This option is most secure.
An assembly can operate with a unique policy that meets the minimum permission requirements for the assembly.
By creating a custom security policy, you can ensure the destination server can run your Web Parts.
Requires the most configuration of all three options. Install your assemblies in the GAC
Easy to implement. This grants Full trust to your assembly without affecting the trust level of assemblies installed in the BIN directory.
This option is less secure.
Assemblies installed in the GAC are available to all virtual servers and applications on a server running Windows SharePoint Services. This could represent a potential security risk as it potentially grants a higher level of permission to your assembly across a larger scope than necessary
In a development environment, you must reset IIS every time you recompile assemblies.
Licensing issues may arise due to the global availability of your assembly.
Does SharePoint work with NFS?
Yes and no. It can crawl documents on an NFS volume, but the sharepoint database or logs cannot be stored there.
How is SharePoint Portal Server different from the Site Server?
Site Server has search capabilities but these are more advanced using SharePoint. SPS uses digital dashboard technology which provides a nice interface for creating web parts and showing them on dashboards (pages). SS doesn’t have anything as advanced as that. The biggest difference would be SPS document management features which also integrate with web folders and MS Office.
What would you like to see in the next version of SharePoint?
A few suggestions:
1. SPS and STS on same machine
2. Tree view of Categories and Folders
3. General Discussion Web Part
4. Personalization of Dashboards
5. Role Customization
6. Email to say WHY a document has been rejected for Approval
7. More ways to customize the interface
8. Backup and restore an individual Workspaces
9. Filter for Visio
10. Better way to track activity on SPS
11. Ability to Save as from Adobe to space on My Network Places
Why Sharepoint is not a viable solution for enterprise wide deployments?
Planning an enterprise deployment using SharePoint features is a very difficult task unless you can establish a Service Oriented Architecture, using AD for managing security with well defined roles based information access(EISA). Sounds reasonable, although it seems difficult to deploy with the tools limitations in document storage.
Document management does not scale beyond a single server, but scales great within a single server. For example, a quad Xeon machine with 4GB of RAM works great for a document management server that has about 900,000 - 1,000,000 document, but if you need to store 50,000,000 document and want to have them all in one single workspace then it does not scale at all. If you need a scenario like this, you need to plan your deployment right and it should scale for you, it just does not right out of the box. If you are using your server as a portal and search server most for the most part it scales great. You can have many different servers crawl content sources and have separate servers searching and serving the content.
If you have < 750,000 documents per server and fewer than 4 content sources and fewer than 50,000 users, SPS should scale just fine for your needs with the proper planning.
What are the actual advantages of SharePoint Portal Services (SPS) over SharePoint Team Services (STS)?
SharePoint Portal Services (SPS) has MUCH better document management. It has check-in, check-out, versioning, approval, publishing, subscriptions, categories, etc. STS does not have these features, or they are very scaled back. SharePoint team Services (SPS) has a better search engine, and can crawl multiple content sources. STS cannot. STS is easier to manage and much better for a team environment where there is not much Document Management going on. SPS is better for an organization, or where Document Management is crucial.
How Does SharePoint work?
The browser sends a DAV packet to IIS asking to perform a document check in. PKMDASL.DLL, an ISAPI DLL, parses the packet and sees that it has the proprietary INVOKE command. Because of the existence of this command, the packet is passed off to msdmserv.exe, who in turn processes the packet and uses EXOLEDB to access the WSS, perform the operation and send the results back to the user in the form of XML.
How do I open an older version of a document?
Normally, all previous versions are located in the shadow, so if you right click a published document from within the web folders, go to properties and then the third tab, versions you can view older versions.
If you want to do this in code:
strURL = “url of the last published version”
Set oVersion = New PKMCDO.KnowledgeVersion
Set prmRs = oVersion.VersionHistory(strURL)
Set oVersion = Nothing
prmRS will contain a recordset, which contains the url to the old versions in the shadow.
Why do the workspace virtual directories show the error “stop sign” symbol in the IIS snap-in?
If World Wide Web Publishing Service (W3SVC) starts before Microsoft Exchange Information Store (MSExchangeIS), “stop sign” symbols appear under the Default Web Site folder of the Internet Information Services console in Microsoft Management Console (MMC).
There is a dependency between the local paths of the SharePoint Portal Server virtual directories and the MSExchangeIS. You must start MSExchangeIS first, followed by W3SVC.
Complete the following steps to prevent the stop signs from appearing each time you restart:
1. Change the Startup type for W3SVC to Manual.
2. Restart the server. The MSExchangeIS service starts automatically.
3. Start W3SVC.
What newsgroups are available?
There are two,
* microsoft.public.sharepoint.portalserver and
* microsoft.public.sharepoint.portalserver.development.
What is SharePoint from a Technical Perspective?
Technically SharePoint illustrates neatly what Microsoft’s .net strategy is all about: integrating Windows with the Web. Microsoft has previously made accessing stuff on a PC easier, (Windows) then on a network (NT) and now on the web (.NET). SharePoint is an application written to let a user access a web accessible directory tree called the Web Storage System.
SharePoint was written with a set of technologies that allow the programmer to pass data, functions, parameters over HTTP, the web’s medium. These are XML, XSL and SOAP, to name a few I understand the basics of!
To the user it looks easy, like Hotmail, but every time they click a button or a link, a lot has to happen behind the scenes to do what they want to do quickly and powerfully. Not as easy as you might think, but SharePoint does it for you. Accessing this Web storage system and the server itself is also done using technologies like ADO, CDO, PKMCDO, LDAP, DDSC, ADSC. More on these later. SharePoint is a great example of how the Internet Platform can be extended and integrated into an existing well adopted technology, Windows.
What is SharePoint from an Administration Perspective?
Administering SharePoint mainly consists of setting it up, which is much easier than you expect, adding the content, which can be just dragging and dropping in whole directory structures and files, and then organizing the files better by giving them categories or other metadata. This is done either through the Web interface or through the SharePoint Client: a program what means you can access SharePoint as a Web folder and then right-click files to select options like “edit profile”. Or add files by dragging them in individually or in bulk.
Setting the security is also important, using NT accounts, either NT4 or Active Directory (or both in mixed mode) you can give users access to files/folders the same way as you do in standard Windows. Users can be grouped and the groups given access privileges to help manage this better. Also SharePoint has 3 Roles that a User or Group can be given on a particular item. Readers can see the item (i.e. document/file or folder) but not change it, Authors can see and edit items and coordinators can set security privileges for the part of the system they have control over. Thus, you could set 12 different coordinators for 12 different folder trees, and they could manage who can do what within that area only.
What is SharePoint from a Users Perspective?
From a Users perspective SharePoint is a way of making documents and folders on the Windows platform accessible over the web. The user visits the SharePoint Portal web page, and from there they can add documents, change documents & delete documents. Through this Portal, these documents are now available for discussion, collaboration, versioning and being managed through a workflow. Hence the name “Share-Point”. Details about the document can be saved too, such as: who wrote it, when, for whom, its size, and version, category or target audience. These can then be used to find the document through SharePoint’s Search facility. Even documents not “in” SharePoint can be included in the search engine’s index so they become part of the portal. All in all, it’s a great way to get stuff up on the web for users with average technical skills, and for administrators to manage the content.
What are the various Sharepoint 2003 and Exchange integration points?
Link to Outlook
This is a button on contacts or events lists that lets Outlook 2003 add a pst file named Sharepoint Folders and it links to the data on the site. It’s read-only, but you could make the home page for that PST be the Sharepoint site for easier viewing. The link to outlook feature seems more to be where some can public a calendar, but not want too much collaboration. For example, a holiday schedule, company meeting schedule, etc, can be made available for people to be able to view from Outlook without having to go to a web browser. Another nice thing about OL2K3 is that you can compare these calendars with others side by side.
Searching Public Folders
With SPS you can index Exchange’s public folders with the search engine so that all that precious public folder content is searchable. You’ll want to look at content sources and indexing in Sharepoint administration.
Displaying Public Folders in a web part
Since exchange web-enables public folders, you can create a web part that displays that content. IE, http://exchangeserver/Public/IT/Helpdesk will display the IT/Helpdesk public folder via OWA. So you add the Page Viewer web part to a page and point it at that URL. The key here is to add ?cmd=contents to the end of the url if you don’t want the navigator pane on the left.
Smart web parts
Some of the web parts that come with SPS allow you to add a web part to a page that actually takes the users outlook info (calendar, inbox, contacts, tasks) and put them into the page.
The SmartPart Web Part project template for Visual Studio allows developers to create quickly a project which contains the base infrastructure to:
* write a web user control (ASCX)
* wrap the user control in a SmartPart instance
* generate a SharePoint Solution file (WSP) for easy deployment
* generate a setup package for a wizard driven installation
Can SharePoint compare two document versions?
“In Word 2003, you can compare documents side by side. Open two documents. Then, from the Window menu of one of them, select the Compare Side By Side command. If you have only two documents open, the command will automatically choose to compare them. If you have three or more documents open, you’ll have to select which document to compare with the current file.
A floating toolbar with two buttons will open. If the button on the left is selected, Word will scroll both documents at the same time. Press the button on the right side of the toolbar to return to where the cursor was located when you started comparing.”
What are the integration differences between SPS 2003 and the various Office versions?
SPS webpage can detect you have installed the Office 2003 and run local dll to implement some SPS function, e.g. multi-file upload only works when you have office 2003 installed.
Integration with Office XP is gone.
You will get guys telling you that you can integrate with SPSv2 if you install a backwards compatible document library - but that’s really just putting a bit of SPS 2001 on the server.
Believe me, check-in, check-out, which are themselves very basic, are not available from inside Office XP, or even from the context menu in Windows Explorer.
The ONLY option you have is to use the web interface to check-in or check-out.